ICRealTime How-to Notes 96006

 

Setup Two-Way Talk [DVR PRO 4/8/16]

 

[This note applies to all ICR Pro series DVRs]

Note: In the picture, the number represents the step number in the walkthrough.

 

Step 1: Login to the DVR as administrator through the net client software. Click on “Manager Login”. Proceed with picking the correct host name and enter in you’re administrator password.

 

Step 2: Once logged in, click on “Remote Config” towards the bottom left hand side.

Step 3: Now click on “Host System Setup”.

 

Step 4: Navigate to the tab at the top of the newly opened window and click on “Audio”. You must make sure that “Chan. 1” is set to “Include”. After that’s set, click on “Apply” at the bottom.

 

Step 5: Now you should be able to use two-way talking by pressing the “Remote Talk” icon towards the bottom right hand side.

 

 

 

Step 6: You should now be able to talk through your microphone that’s installed at your computer and hear it coming out of the device installed on the audio out connection of your DVR.

 

Step 7: To end the two way talking, simply press the icon again.

 

Note: If no sound can be heard when all the steps are complete, make sure your microphones volume is set to a considerable level and that the audio out device’s volume is set as well.